SRS Labs Projector CP-X809 User Manual download pdf (Page 49)

OPTION menu

OPTION menu (continued)

Item Description

SECURITY

This projector is equipped with security functions.

User registration is required before using the security functions.

Please contact your local dealer.

1. Using Security Features

1.1 Inputting the PASSWORD

1.1-1 Use the ▲/▼ buttons on the OPTION

menu to select SECURITY and press the ►

button. The ENTER PASSWORD box will be

displayed. The factory default PASSWORD is

2600. This PASSWORD can be changed (1.2

Changing the PASSWORD).

• It is strongly recommended the factory default

PASSWORD to be changed as soon as possible.

1.1-2 Use the ▲/▼/◄/► buttons to enter the

registered PASSWORD. Move the cursor to

the right side of the ENTER PASSWORD

BOX and press the ► button to display the

SECURITY menu.

• If an incorrect PASSWORD is input, the ENTER PASSWORD BOX will

be displayed again. If incorrect PASSWORD is input 3 times, the projector

will turn off. Afterwards the projector will turn off every time an incorrect

PASSWORD is input.

1.2 Changing the PASSWORD

1.2-1 Use the ▲/▼ buttons on the SECURITY menu

to select SECURITY PASSWORD CHANGE

and press the ► button to display the ENTER

NEW PASSWORD BOX.

1.2-2 Use the ▲/▼/◄/► buttons to enter the new

PASSWORD.

1.2-3 Move the cursor to the right side of the

ENTER NEW PASSWORD BOX and press

the ► button to display the NEW PASSWORD

AGAIN BOX, enter the same PASSWORD

again.

1.2-4

Move the cursor to the right side of the NEW

PASSWORD AGAIN BOX and press the ►

button and the NOTE NEW PASSWORD BOX

will be displayed for about 20 seconds, please

make note of the PASSWORD during this time.

Pressing the ENTER button on the remote control or INPUT button on

the projector will close the NOTE NEW PASSWORD BOX.

• Please do not forget your PASSWORD.

1.3 If you have forgotten your PASSWORD

1.3-1

Follow the procedure in 1.1-1 to display the ENTER PASSWORD BOX.

1.3-2 While the ENTER PASSWORD BOX is displayed, press and hold the

RESET button on the remote control for about 3 seconds or press and

hold the

INPUT button for 3 seconds while pressing the ► button on

the projector.

The 10 digit Inquiring Code will be displayed.

• If there is no key input for about 55 seconds while the Inquiring Code is

displayed, the menu will close. If necessary, repeat the process from 1.3-1.

1.3-3 Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD

will be sent after your user registration information is conﬁrmed.

(continued on next page)

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 76 77

Comments to this Manuals

No comments

SRS Labs Projector CP-X809 User Manual Page 49

Comments to this Manuals