SRS Labs Projector CP-X809 User Manual download pdf (Page 51)

OPTION menu

OPTION menu (continued)

Item Description

SECURITY

(continued)

3. Using the PIN LOCK Function

PIN LOCK is a function which prevents the projector from being used unless

a registered Code is input.

3.1 Registering the PIN Code

3.1-1 Use the ▲/▼ buttons on the SECURITY menu

to select PIN LOCK and press the ► button

or the

ENTER button to display the PIN LOCK

on/off menu.

3.1-2 Use the ▲/▼ buttons on the PIN LOCK on/off

menu to select TURN ON and the PIN BOX

will be displayed.

3.1-3 Input a 4 part PIN Code using the ▲/▼/◄/►,

RGB and INPUT buttons.

The PIN CODE AGAIN BOX will appear.

Reenter the same PIN Code. This will

complete the PIN Code registration.

•

If there is no key input for about 55 seconds while

the PIN BOX or the PIN CODE AGAIN BOX is

displayed, the menu will close. If necessary, repeat

the process from 3.1-1.

Afterwards, anytime the projector is restarted after

the power switch is turned off the PIN BOX will be

displayed. Enter the registered PIN Code.

The projector can be used after entering the

registered PIN Code. If an incorrect PIN Code is

input, the PIN BOX will be displayed again.

If an incorrect PIN Code is input 3 times, the projector will turn off.

Afterwards the projector will turn off every time an incorrect PIN Code is

input. The projector will also turn off if there is no key input for about 5

minutes while the PIN BOX is displayed.

This function will activate only when the projector is started after the power

switch was turned off.

•

Please do not forget your PIN Code.

3.2 Turning Off the PIN LOCK Function

3.2-1 Follow the procedure in 3.1-1 to display the PIN LOCK on/off menu.

Use the ▲/▼ buttons to select TURN OFF and the PIN BOX will be

displayed.

Enter the registered PIN Code to turn the PIN LOCK function off.

If an incorrect PASSWORD is input 3 times, the menu will close.

3.3 If you have forgotten your PIN Code

3.3-1 While the PIN BOX is displayed, press and

hold the

RESET button for three seconds

or press and hold the

INPUT button for 3

seconds while pressing the ► button on the

projector.

The 10 digit Inquiring Code will be displayed.

•

If there is no key input for about 5 minutes while the Inquiring Code is

displayed, the projector will turn off.

3.3-2 Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD

will be sent after your user registration information is conﬁrmed.

(continued on next page)

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 76 77

Comments to this Manuals

No comments

SRS Labs Projector CP-X809 User Manual Page 51

Comments to this Manuals